Volume 2, Issue 1, February 2013, Page: 25-31
Cleanness Evaluation Method of Remaining Dirt on Inner Surface of Narrow Tubule by IR Spectroscopy
Shouhei Koyama, Dept. of Faculty of Textile Science and Technology, Shinshu University, Nagano, Japan
Yuki Miyauchi, Dept. of Faculty of Textile Science and Technology, Shinshu University, Nagano, Japan
Hiroaki Ishizawa, Dept. of Faculty of Textile Science and Technology, Shinshu University, Nagano, Japan
Published: Feb. 20, 2013
DOI: 10.11648/j.optics.20130201.14      View  2965      Downloads  103
We try to develop a new measurement method for cleanliness evaluation of inner surface of narrow tubule.In this measurement method, we use the infrared spectroscopy and the partial least squares regression (PLSR).The absorption spectrum is measured by using fiber probe and cone mirror.We measure the spectra of the known amount of dirt.We build a calibration curve using these spectra and the PLSR.Next, we measured spectrum of inner surface of narrow tubule, and calculates the amount of remaining this dirt by the calibration curve.This method can be measured in a non-contact and non-destructive.This method can identify the remaining position and the type and amount of dirt.In this paper, we propose this measurement method as new cleanliness evaluation method has overcome the problems that exist in the cleanliness evaluation.
Cleanness Evaluation, IR Spectroscopy, Optical Fiber Probe And Cone Mirror, Inner Surface Of Narrow Tubule, Remaining Dirt
To cite this article
Shouhei Koyama, Yuki Miyauchi, Hiroaki Ishizawa, Cleanness Evaluation Method of Remaining Dirt on Inner Surface of Narrow Tubule by IR Spectroscopy, Optics. Vol. 2, No. 1, 2013, pp. 25-31. doi: 10.11648/j.optics.20130201.14
Murdoch H., Taylor D., Dickinson J., Walker J. T., Perrett D., Raven N. D. and Sutton J.M., Surface decontamination of surgical instruments, an ongoing dilemma, J. Hosp. Infect, 63(4), 2006, pp.432-438.
R. Ulrika, E. Lars, H. Paul, L. Torbjörn, L. Lisa, L. A. Lisa, M. Eva and R. Klas, A test for cleaning and disinfection processes in a washer-disinfector, Apmis, vol.109, 4, 2001, pp. 299-304.
Jetté L. P., Lambert N.G., Evaluation of two hot water washer disinfectors for medical instruments, Infect Control HospE-pidemiol,9(5), 1988, pp.194-199.
Smith G.W., Goldie F., Long S., Lappin D.F., Ramage G. and Smith A.J.,Quantitative analysis of residual protein conta-mination of podiatry instruments reprocessed through local and central decontamination units, Journal of Foot and Ankle Research, 4(2), 2011.
B. M. Andersen, K.Hochlin and J. P.Daling, Cleaning and Decontamination of Reusable Medical Equipments,Including the use of Hydrogen peroxide Gas Decontamination, J Mi-crobial BiochemTechnol, vol. 4(2), 2012, pp. 057-062.
WHO Guidelineson Hand Hygiene in Health Care, WHO Library Cataloguing-in-Publication Data, World Health Or-ganization 2009.
M. J. Alfa, P. Degagne and N. Olson, Worst-case soiling levels for patient-used flexible endoscopes before and after cleaning, American Journal of Infection Control, vol.27, 5, 1999, pp.392–401.
Baxter R. L., Baxter H. C., Campbell G. A., Grant K., Jones A., Richardson P. and Whittaker G., Quantitative analysis of residual protein contamination on processed surgical in-struments, J Hosp Infect, vol.63, 2006, pp.439-444.
M. Shimizu, S. Nakata, R. Fushimi, A. Mizutani, S. Noguchi, M. Monden, Y. Isaka and S. Uraoka, Development of the High Sensitivity Measurement Method for Checking Cleanliness of Medical Instruments, Japanese society of Medical Instrumentation, vol.75, No.1, 2005, pp.28-33.
T. Oda, Y. Hirata and T. Furuta, Evaluation of Cleaning Efficacy and Examination of New Test Soil Model, Japanese society of Medical Instrumentation, vol.76, No.11, 2006, pp.793-797.
D.R. Vij, Handbook of Applied Solid State Spectroscopy, Springer, 2006, pp. 411-450.
S. Koyama, H. Ishizawa, Y. Sakata, T. Gotoh, K. Nakamura, H. Kanai, T. Nishimatsu and E. Toba, Measurement of Re-maining Dirt in Medical Instrument Based on IR Spectros-copy and Cone-Shaped Mirror Reflectance, IEEE IMTC, 2005, pp.921-924.
D. M. Haaland and E. V. Thomas, Partial LeastSquares Me-thods for Spectral Analyses. 1, Relation to Other Quantitative Calibration Methods and the Extraction of Qualitative Information, Analytical Chemistry, vol. 60, No. 11, 1988.
S. Wold, A. Ruhe, H. Wold, and W. J. Dunn, The Collinearity Problem in Linear Regression, The Partial Least Squares (PLS) Approach to Generalized Inverses, SIAM J Sci Stat Comput, 5, 1984, pp. 735–743.
S. Wold, M. Sjostrom and L. Ericksson, PLS-regression, a basic tool of chemometrics, ChemomIntell Lab Syst, 58, 2001, pp. 109–130.
A. Lorber, L. E. Wangen and B. R. Kowalski, A theoretical foundation for the PLS algorithm, Journal of Chemometrics, vol.1(1), 1987, pp. 19–31.
S. Koyama, Y. Miyauchi and H. Ishizawa, Measurement system of remaining dirt on inner surface of a narrow tubule based on infrared spectroscopy, SICE Annual Conference, 2011, pp.82-86.
Rohman A., Kuwat T., Retno S., Sismindari, Yuny E. and Tridjoko W., Fourier Transform Infrared Spectroscopy ap-plied for rapid analysis of lard in palm oil, International Food Research Journal,vol.19 (3), 2012, pp.1161-1165.
R. Kramer, Chemometric Techniques for Quantitative Analysis, Marcel Dekker INC, 1998, pp. 131-142.
Browse journals by subject