Volume 2, Issue 3, June 2013, Page: 42-46
Polarization Analysis of Antireflection Coating for SOS material System
Imran Khan, Dept. of Electronics & Communication Engineering, Khulna University of Engineering & Technology, Khulna, Bangladesh
M. Mostafizur Rahman, Dept. of Electronics & Communication Engineering, Khulna University of Engineering & Technology, Khulna, Bangladesh
Received: May 25, 2013;       Published: Jun. 20, 2013
DOI: 10.11648/j.optics.20130203.11      View  3307      Downloads  174
Abstract
Using CAD tool Essential Macleod, MATLAB and Optimac-investigation is done on an antireflection coating for SOS material system. Here the polarization (TE & TM) effect of antireflection coating for SOS material system is mainly analyzed. No coating, single layer coating, optimized single layer coating and finally multilayer coating are used to investigate the polarization effect. It is observed that the mean transmission of 96.56%, 98.74% and 99.99% obtained for no coating, single layer coating and multilayer coating of a SOS material system respectively.
Keywords
Anti Reflection Coating, Silica on Silicon, TM, TE, Polarization
To cite this article
Imran Khan, M. Mostafizur Rahman, Polarization Analysis of Antireflection Coating for SOS material System, Optics. Vol. 2, No. 3, 2013, pp. 42-46. doi: 10.11648/j.optics.20130203.11
Reference
[1]
B.E.A. Saleh, M.C.Teich, Fundamentals of Photonics, Second Edition, Wiley & Sons, Canada, 2007 & Microphotonics syllabus, ch.3, session: 2009-2010, www.photonics.intec.ugent.be.
[2]
I. Hodgkinson, Q.H. Wu, "Anisotropic antireflection coatings: design and fabrication", OPTICS LETTERS, Vol. 23, No. 19, October 1998, pp. 1553-1555.
[3]
H.K.Raut, V.A. Ganesh, A.S. Nair and S. Ramakrishna, "Anti-reflective coatings: A critical, in-depth review", Energy Environ. Sci., 2011, 4, 3779. www.rsc.org/ees.
[4]
I.G.Kavakli, K.Kantarli, "Single and double layer antireflection coatings on silicon", Turk J Phys, 26 (2002), pp. 349-354.
[5]
I. Khan, "Polarization effect of antireflection coating for SOI material system", International Journal of Science and Research, Vol.1, Issue 3, pp. 59-63.
[6]
L. Atternas, L. Thylen, "Single-layer antireflection coating of semiconductor lasers: polarization properties and the influence of the laser structure", Journal of Lightwave Tech., Vol.7, No.2, February 1989, pp.426-430.
[7]
R.R.Willey, "Non-polarizing beamsplitter and AR coating design", In Procedings of the Society of Vacuum Coaters on 48th Annual Technical Conference, 2005, ISSN-0737-5921, pp.391-395.
[8]
I. Yamada, K.Kintaka, J.Nishii, S.Akioka, Y. Yamagishi and M. Saito, "Transmittance enhancement of a wire-grid polarizer by antireflection coating", APPLIED OPTICS, Vol.48, No.2, January 2009, pp. 316-320.
[9]
P. Yeh, Optical Waves in Layered Media, John Wiley and Sons, 1988.
[10]
J.A.Dobrowolski, J.E.Ford, B.T.Sullivan, L.Lu and N.R. Osborne, "Conducting antireflection coatings with low polarization dependent loss for telecommunication applications", Optics Express, Vol. 12 Issue.25, 2004, pp. 6258-6269.
[11]
H. A. Macleod, Thin-film Optical Filters, 2nd edn, McGraw-Hill, 1989.
[12]
www.mellesgriot.com-Technical Information.
Browse journals by subject